Main unit x 1
Separate water tank x 1
Opaque water tank x 1
Automatic cleaning cap x 1
Round suction nozzle (used on cheeks, forehead) x 1
Elliptical suction nozzle (used on nose wing, nasal groove) x 1
Small hair Brush x 1
Charging cable x 1
Flannel bag x 1
Moisturizing essence water 200ml x 1
Solve the problem of facial oil clogging, moisturizing, moisturizing and cleaning in one step, rejecting blackheads.
It truly realizes hot water export and softens cutin, and at the same time, it can better clean and absorb blackheads in the follow-up, and achieve deep cleaning.
2 in 1 , dry and absorb moisture at the same time, clean thoroughly and moisturizing at the same time, avoid skin pulling damage.
Cold water shrinks pores, ice therapy tightens, repairs and calms skin, shrinks pores and restores skin to a healthy state.
With moisturizing essence water, powerful cleansing while maintaining skin water and oil balance, keeping skin healthy.
The water tank at the bottom can be replaced, turning into a dual-purpose dry blackhead suction machine.
Warm warm export mode:
This mode awakens the skin with red light, opens the pores through a heat circulation system of about 45°C, softens blackheads, oil, cosmetic residues, etc., and uses the vacuum adsorption function to initially clean the pores and remove blackheads.
Vacuum suction mode:
Remove stubborn blackheads.
This mode uses vacuum instant suction technology to deeply clean pores and remove key and stubborn blackheads, grease, cosmetic residues, etc.
Cleaning water and oxygen penetration mode:
This mode uses the vacuum adsorption function to meticulously clean the pores and garbage, and at the same time replenishes the skin with the moisture and oxygen it needs through the hydrogen-oxygen water circulation system.
Ice compacting mode:
This mode uses blue light to calm and tighten, enhance cell activity, whiten and rejuvenate the skin, fade marks, tighten pores through the ice therapy circulation system at about 15°C, lift the skin, and lock in moisture and oxygen.
Plug: Type-C charging cable
Battery capacity: 1500mAh
Input voltage: 5V-1A
Output voltage: 3.7V
Use time: about 60 minutes
How to use:
Warm warm export mode:
Can be used with a separate water tank, softening blackheads while sucking, and preliminary cleaning of pores.
After cleansing, switch to this mode and choose the level that suits you.
Use point-suction or gentle lifting and sliding methods to clean the parts that need to be cleaned.
Do not stay on a single part for more than 3 seconds.
Vacuum suction mode:
Can be used with opaque water tank, dry suction use, deep cleaning pores.
Switch to this mode and choose the suction head and appropriate level that suit your needs.
Use point-suction or gentle lifting and sliding methods to clean the parts that need to be cleaned.
Do not stay on a single part for more than 3 seconds.
Cleaning water and oxygen penetration mode:
Can be used with an opaque water tank, replenishing water while sucking, and meticulously cleaning pores.
After completing the pore cleaning operation, switch to this mode and use it with water or pore-shrinking toner.
Choose the level that suits you, use point-suction or gentle lifting and sliding methods to clean the parts that need to be cleaned.
Do not stay on a single part for more than 3 seconds.
Ice compacting mode:
Can be used with a separate water tank, shrinks pores, locks water and soothes.
After the water and oxygen penetration operation is completed, switch to this mode and select the level that suits you.
Use point-suction or gentle lifting and sliding methods to clean the parts that need to be cleaned.
Do not stay on a single part for more than 3 seconds.
After each function mode is completed, the instrument will automatically jump to the next function mode.
At this time, the next mode light flashes, and the user can press the "power mode key" to enter the use of the next function mode.
If there is no operation within 60 seconds "power mode" mode key" the instrument will automatically shut down.
It is recommended to use it 1-2 times a week.
When using it, make sure the tilt angle of the instrument is not greater than 40 degrees, otherwise the instrument will stop working. |